Configuring Vlan; Vlan Fundamentals - HP A5830 Configuration Manual

Configuring VLAN

Ethernet is a network technology based on the CSMA/CD mechanism. Because the medium is shared,
collisions and excessive broadcasts are common on Ethernet networks. To address the issue, VLAN was
introduced to break a LAN down into separate VLANs. VLANs are isolated from each other at Layer 2. A
VLAN is a bridging domain, and contains all broadcast traffic within it.
Figure 31 A VLAN diagram
Router
A VLAN is logically divided on an organizational basis rather than on a physical basis. For example,
using VLAN, all workstations and servers that a particular workgroup uses can be assigned to the same
VLAN, regardless of their physical locations.
VLAN technology delivers the following benefits:
Confining broadcast traffic within individual VLANs. This reduces bandwidth waste and improves
1.
network performance.
Improving LAN security. By assigning user groups to different VLANs, isolate them at Layer 2. To
2.
enable communication between VLANs, routers or Layer 3 switches are required.
Creating flexible virtual workgroups. Because users from the same workgroup can be assigned to
3.
the same VLAN regardless of their physical locations, network construction and maintenance are
much easier and more flexible.

VLAN fundamentals

To enable a network device to identify frames of different VLANs, a VLAN tag field is inserted into the
data link layer encapsulation.
The format of VLAN-tagged frames is defined in IEEE 802.1Q issued by the Institute of IEEE in 1999.
In the header of a traditional Ethernet data frame, the field after the destination MAC address and the
source MAC address is the Type field, which indicates the upper layer protocol type, as shown in
32.
VLAN 2
Switch A
VLAN 5
Switch B
101
Figure