Step...
2.
Enter Ethernet interface view
3.
Configure the port as a trunk
port
4.
Assign the port to the local
SVLANs
5.
Apply the uplink policy
configured for the customer-
side port to the incoming
traffic
6.
Apply the downlink policy
configured for the customer-
side port to the outgoing
traffic
Configuring the network-side port
To configure the network-side port:
Step...
1.
Enter system view
2.
Enter Ethernet interface view
3.
Configure the port as a trunk
port
4.
Assign the port to local
SVLANs
5.
Apply the uplink policy for the
network-side port to the
outgoing traffic
Command...
interface interface-type interface-
number
port link-type trunk
port trunk permit vlan { vlan-id-list
| all }
qos apply policy policy-name
inbound
qos apply policy policy-name
outbound
Command...
system-view
interface interface-type interface-
number
port link-type trunk
port trunk permit vlan { vlan-id-list
| all }
qos apply policy policy-name
outbound
179
Remarks
—
Required
The default link type of an
Ethernet port is access
Required
By default, a trunk port is in only
VLAN 1
Required
Skip this step if you have not
configured an uplink policy for
replacing SVLAN tags
Required
Remarks
—
—
Required
The default link type of an
Ethernet port is access
Required
By default, a trunk port is in only
VLAN 1
Required
Skip this step if you have not
configured an uplink policy for
replacing CVLAN tags