Assigning An Access Port To A Vlan - HP 6125G Configuration Manual

Port type
Access
Trunk
Hybrid

Assigning an access port to a VLAN

You can assign an access port to a VLAN in VLAN view or interface view (including Layer 2 Ethernet
interface view, and Layer 2 aggregate interface view).
To assign one or multiple access ports to a VLAN in VLAN view:
Step
1. Enter system view.
2. Enter VLAN view.
3. Assign one or a group of
access ports to the VLAN.
To assign an access port (in interface view) to a VLAN:
Step
1. Enter system view.
Actions (in the inbound direction)
Untagged frame
Tags the frame with the
PVID tag.
Checks whether the PVID
is permitted on the port:
•
If yes, tags the frame
with the PVID tag.
•
If not, drops the
frame.
Command
system-view
vlan vlan-id
port interface-list
Command
system-view
Tagged frame
•
Receives the frame if its
VLAN ID is the same as the
PVID.
•
Drops the frame if its VLAN
ID is different from the
PVID.
•
Receives the frame if its
VLAN is carried on the
port.
•
Drops the frame if its VLAN
is not carried on the port.
Remarks
N/A
If the specified VLAN does not exist, this
command creates the VLAN first.
By default, all ports belong to VLAN 1.
Remarks
N/A
105
Actions (in the outbound
direction)
Removes the VLAN tag and
sends the frame.
•
Removes the tag and send
the frame if the frame carries
the PVID tag and the port
belongs to the PVID.
•
Sends the frame without
removing the tag if its VLAN
is carried on the port but is
different from the PVID.
Sends the frame if its VLAN is
carried on the port. The frame is
sent with the VLAN tag removed
or intact depending on your
configuration via the port hybrid
vlan command. This is true of the
PVID.