Troubleshooting; Maintenance Diagnostics; How To Start Maintenance Diagnostics - MUTOH ValueCut VC2-1800 Maintenance Manual

MAINTENANCE MANUAL

Troubleshooting

Maintenance Diagnostics

This section describes the maintenance diagnostics as troubleshooting. This diagnostic feature is to
check hardware to find out which components are good or defective. Using this diagnostic test facility
enables the diagnosing of hardware components.

How to Start Maintenance Diagnostics

To start the Maintenance Diagnostics, Press and hold down the On/Off Line key and the CUT TEST key
while turning on the machine. The following sub-sections will explain the function of each maintenance
diagnostic sequence.
VC2E-MM-00
45