Unpacking And Installation - Canon GP405 Service Manual

II. UNPACKING AND INSTALLATION
Bringing a piece of metal from a cold to a warm place can cause droplets of water to form on its
surface. Such a phenomenon is known as condensation, and a copier suffering from condensation
can generate blank copies.
If the copier has been brought in from a cold place, leave it alone for one hour or more without
unpacking before starting the installation work.
The unpacking and installation work consists of the following:
A. Unpacking and Removing the Fixing Materials
B. Supplying Toner
C. Stirring the Toner
D. Setting the Drum Cartridge
E. Setting the Cassette
• Dial label
• Size label
F. Mounting the Feeder Parts
• Stamp
• Tray guide
G. Making Settings
H. Checking the Copy Images
If the images are faulty,
1. Shading adjustment
2. Auto density adjustment
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 12 INSTALLATION
12-3