Canon GP405 Service Manual page 349

Terminator
All SCSI-2 interface connectors are given unique SCSI ID No., requiring you to use an ID No.
different from the host computer when connecting the SCSI PCB. If a SCSI-2 interface is used,
further, the device at the end of the connection must be equipped with a terminator.
Setting the Interface Environment
After connecting the host computer to the SCSI board, you must match the interface types of
both. Normally, the interface type of the host computer is changed; if this is not possible, be
sure to use the copier's control panel to make appropriate changes.
Caution:
Be sure that the SCSI ID No. is not identical to any of the ID Nos. used by the external devices
connected to the system.
Setting the SCSI ID
1) Select the SCSI key on the LCD screen.
2) Press the Off-Line key, and select an ID setting.
3) Using the +/- key, set a SCSI ID.
4) Turn off and then on the main power.
Related Error Codes
E601 error in communication between SCSI board and machine
E603 blown SCSI fuse
For details, see "Self Diagnosis" in Chapter 14.
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 SYSTEM INTEGRATION
11-5