Canon GP405 Service Manual page 295

8) Remove one of the screws [12] from the
lower stay; then, fit it in the hole [13] to
release the lower roller.
Figure 9-217-1
[13]
Figure 9-217-2
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[12]
CHAPTER 9 FIXING SYSTEM
9) Open the separation claw assembly [14],
and mount the protection cover [15] with
a screw [16]; this way, the separation
assembly will remain free.
[16]
[15]
[14]
Figure 9-218
10) Remove the C-ring [17] used to secure the
upper fixing roller in place; then, remove
the gear [18] and the insulating bush [19].
[18]
[17]
Figure 9-219
[19]
9-19