Canon GP405 Service Manual page 544

CHAPTER 14 TROUBLESHOOTING
SW701 States
AB
SW1 OFF
SW2 OFF
SW3 OFF
SW4 OFF
SW5 OFF
SW6 OFF
Size Configuration
Use service mode to set the appropriate size (COPIER>OPTION>BODY>MODEL-SZ).
AB
Inch
A
AB/Inch
The setting will affect the following items:
• Pattern for default enlargement/reduction.
• Size detection by the feeder. (If the setting under FEEDER>OPTION>SIZE-SW in service
mode is '1', AB/Inch detection will be made regardless of the country of installation.
Arrangement of the Original Sensor
The arrangement of original sensors may be changed. If the feeder is used, these switch settings
need not be changed, since detection will be by the feeder. For sensor arrangement, see
"Identifying the Size of Originals" in Chapter 3.
Use SW5 and SW6.
AB
Inch
A
14-126
Inch AB/Inch
ON ON
OFF ON
ON OFF
OFF ON
ON OFF
OFF OFF
MODEL-SZ setting
0
1
2
3
AB Inch
OFF OFF
ON OFF
OFF ON
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
A
OFF
ON
ON
ON
OFF
ON