Canon GP405 Service Manual page 398

CHAPTER 12 INSTALLATION
9) Set the mode of control.
9-1) Set the mode of control using the
Keypad-A1.
Press /
indicated.
9-2) Enter the appropriate number for mode
of control to suit the copier model and
the preference of the user. (Initially, it is
set to 1.)
No. Number Paper
of groups
1 3000
2 1000
3 1000
Table 12-505
9-3) For instance, to set the mode of control
to 3,
1. When FORMAT=1 (default) is
indicated, Press the 3 key.
(If you have made a mistake, press
the C key to clear. Or, you may
press the ESC key to stop the
work.)
2. When FORMAT=3 is indicated,
press the ESC key.
3. FORMAT=3
formatting takes place. The cursor
keeps flashing during formatting.
The mode is set to 3 when it stops
flashing.
Caution:
When a new mode of control has been
set, such items as unit price, upper limit,
counter reading, and ID Nos. are all
initialized. Set them as needed.
12-40
until FORMAT=1 is
Mode
size
5 —
5 Single-/double-
sided
5 Mono, 2-color/
Full-color
remains while
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
10) Set the control paper size.
10-1) Change the control panel size using the
DIP switch on the copy data controller
and the Keypad-A1. To use the current
setting, go to step 11).
10-2) Press the /
the paper sizes. (Size 5 OTH will not
be indicated, as it cannot be changed.)
EX 1:
1. SIZE1=A3 is indicated.
2. Press the key.
3. SIZE2=A4 is indicated.
4. Press the key.
5. SIZE3=B4 is indicated.
6. Press the key.
7. SIZE4=B5 is indicated.
8. Press the key.
9. SIZE3=B4 is indicated.
10. Press the key.
11. SIZE2=A4 is indicated.
EX 2: To change control size 3 B4 to LGL,
1. Press the /
SIZE3=B4 .
2. Find the LGL size from the conversion
code table (Table 5-506); press [1] and [3].
3. SIZE3=13 is indicated.
4. Press the ENT key.
5. SIZE3=LGL
the change.
key to scan through
key to indicate
is displayed to indicate