Canon GP405 Service Manual page 564

CHAPTER 14 TROUBLESHOOTING
<ACC-STS>
Indicates accessory connection.
Level 3
FEEDER Feeder connection
SORTER Sorter connection
DECK Paper deck connection (if the paper deck is
required or not)
CARD Control card connection (if a control card is
required)
PCB Accessory board connection
Indicates the number of the board recognized
by the copier.
RAM Indicates the size of the RAM recognized by
the machine.
If standard, 32 MB; with 1 addition, 64 MB;
with 2 additions, 96 MB.
Note: that any first addition must be installed
<ANALOG>
Indicates the analog sensor readings.
Level 3
TEMP Machine internal temperature (environment sensor)
HUM Machine relative humidity (environment sensor)
ABS-HUM Machine absolute humidity (environment sensor)
Indicates in terms of g of water in 100 m3 of air.
DR-TEMP Photosensitive drum ambient temperature
FIX-C Upper fixing roller temperature (°C)
Indicates the temperature detected by the main
thermistor (TH1).
Normally, controlled to 195°C.
14-146
Description
to J723.
Description
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
0: not connected.
1: connected.
0: disable operation.
The cable of the paper deck is
connected to the copier, but the
deck is not recognized by the
copier.
1: enable operation.
The paper deck is fully
recognized by the copier; or, no
paper deck is installed to the
copier as an accessory.
0: disable operation. (The control
card function is effective, but no
card is set.)
1: enable operation. (A control
card is set; or, the control card
function is not effective.)
1: Network board
2: not used.
3: Standard board
3: Standard memory (always 1)
4: Printer
5: SCSI board
6: G3FAX board
7: G3FAX (expansion) board
Remarks
°C
% RH
g
°C
°C
DISPLAY