Canon GP405 Service Manual page 177

Pulling Out Paper
If the pick-up sensor detects a delay once again after retry operation, calling for jam removal,
working from the cassette side could tear out the paper. To enable jam removal from the side of the
right cover, the following takes place:
1) After jam detection, the pull-out roller is driven for a feed length of 10 cm. The paper is
moved so that it will be in view when the right cover is opened.
2) The control panel indicates the Jam message, suggesting removal from the right cover side.
3) Open the right cover, and remove the jam. If the paper is not visible even when the pull-out
roller is operated, remove the paper from the cassette side.
Pick-up roller down
solenoid (SL1)
Pick-up motor (M6)
Pick-up sensor
(PS18)
*1: Paper does not arrive after detection of about 1 sec.
*2: Paper fed by the pull-out roller for a feed lengh of 10 cm.
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Retry started
Copy Start key ON
1
Figure 7-115
CHAPTER 7 PICK-UP/FEEDING SYSTEM
Jam indicator (from right cover)
2
1
7-15