Canon GP405 Service Manual page 283

2. Details of Temperature Control
The copier executes temperature control as follows according tot the environmental conditions
at main power -on and the type of transfer medium. The following table shows the control
temperature and printing conditions in each mode:
Outline of Temperature Control
Normal Mode
At power- Normal
on (main mode
power) (18°C or
more)
L mode*
(less than
18°C)
During Normal
temperature mode
control
Thick
paper mode
(manual
feed)
* If the ambient temperature when the main power is turned on is 18°C or less.
OPTION>BODY>TEMCON2 = 2
(Enhanced fixing is selected.)
At power- Normal
on (main mode
power) (18°C or
more)
L mode*
(less than
18°C)
During Normal
temperature mode
control
Thick
paper mode
(manual
feed)
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Control temperature
Standby Printing
190°C 195°C
Control temperature
Standby Printing
195°C 200°C
CHAPTER 9 FIXING SYSTEM
Effective
temperature
190°C When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 5
sec, enabling printing operation.
When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 20
sec, enabling printing operation.
195°C For each job, initial multiple rotation
is executed during the period from
190°C to 195°C. (Thick paper mode
may be selected on the screen
designed for the selection of manual
feed paper size.)
Effective
temperature
195°C When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 5
sec, enabling printing operation.
When the temperature of the fixing
roller has reached 190°C, initial
multiple rotation is executed for 20
sec, enabling printing operation.
200°C For each job, initial multiple rotation
is executed during the period from
190°C to 195°C. (Thick paper mode
may be selected on the screen
designed for the selection of manual
feed paper size.)
Remarks
Remarks
9-7