Delivery Assembly - Canon GP405 Service Manual

CHAPTER 7 PICK-UP/FEEDING SYSTEM
3) Remove the transfer guide positioning
boss from the copier's front; then, detach
the transfer guide unit [5].
[5]
Figure 7-233
4) Remove the spring [6] and E-ring [7] from
the copier's front; then, detach the bush of
the registration roller.
Figure 7-234
5) Remove the lower registration roller and
then the upper registration roll in the order
indicated. (Be sure to take care not to
damage the teeth of the gear.)
7-62
[4]
[7]
[6]
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
F. Delivery Assembly
1. Removing the Delivery Assembly
1) Turn off the power, and disconnect the
power plug.
2) Open the front door.
3) Open the delivery assembly, and remove
the screw [2]; then, detach the delivery
assembly connector cover [1]. (The
connector cover is hooked in place.)
Lift slightly
to remove.
[1]
Hooks.
Figure 7-235
4) Free the hook [4] of the delivery assembly
lower cover.
[4]
[3]
Figure 7-236
[2]