IV. IDENTIFYING THE SIZE OF AN ORIGINAL
A. Outline
The size of an original may be checked by the paper sensors mounted under the copyboard
glass or by the original width/length sensor of the feeder.
B. Identifying the Size by the Paper Sensors (1)
The paper sensors are arranged under the copyboard glass (Figure 3-401) to identify the size of
an original placed on the copyboard glass.
•
AB Original Sensors
Paper sensor 0 Paper sensor 1
A5
Paper
B5
sensor 2
Paper
sensor 3
A4
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
B5R
A4R
B4
A3
Figure 3-401 Arrangement of Original Sensors
CHAPTER 3 EXPOSURE SYSTEM
•
Inch Original Sensors
Paper sensor 0 Paper sensor 1
STMT
Paper sensor 2
LTR
LTRR
LGL
11x17
3-7