Battery Board - Canon GP405 Service Manual

4) Remove the rear cover.
5) Remove the five screws, and detach the
extension case cover.
6) Pull the lever, and slide out the board from
the extension unit.
SCSI interface board
Lever
Figure 11-312
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
C. Battery Board
When removing or mounting the battery
board, take care not to touch the BD unit.
1. Removing the Battery Board
1) Check to make sure that the Communication
2) Remove the copyboard glass retainer
Copyboard glass retainer mount
Lever
3) Remove the small cover from the IP
Small cover
CHAPTER 11 SYSTEM INTEGRATION
Caution:
Memory lamp is off; then, turn off the main
power.
(right), and detach the copyboard glass.
Copyboard glass
Figure 11-313
cover.
Screw
Figure 11-314
Screws
11-11