Scsi Interface Board - Canon GP405 Service Manual

CHAPTER 11 SYSTEM INTEGRATION
Caution:
If you are installing the extension unit to
the copier, make sure that the connector
screw holes are positioned as shown
before fitting the screw.
Screw hole in
Screw hole in
the extension kit
the copier
Extension unit
Figure 11-309
11-10
Match the
screw holes.
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
B. SCSI Interface Board
1. Removing the SCSI Interface Board
1) Check to see that the Communication
Memory lamp is off; then, turn off the
main power.
2) Remove the terminator.
Terminator
Figure 11-310
3) If the printer board is installed, remove the
PCL face cover shown in the figure.
Screw
PCL face cover
Screw
Figure 11-311