Magnet Plate - Canon GP405 Service Manual

Hide thumbs Also See for GP405:

Table of Contents

CHAPTER 6 IMAGE FORMATION SYSTEM

D. Magnet Plate

1. Removal Procedure

1) Open the front cover.

2) Release the feeding assembly and the

developing assembly; then, detach the

3) Remove the developing assembly.

4) Pull out the magnet plate [1] shown in the

illustration and remove this plate from the

transfer guide.

Figure 6-404-1

Clean with moist cloth every 1,200K

copies. However, in case of soiling at the edge

of copy papers, clean as often as required.

3. Attachment

1) Insert the pointed end of the magnet plate

to the pin at the inner part of the transfer

guide and then insert the plate with the

oval hole to the pin toward the front of the

transfer guide.

2) Take special care to insure that the magnet

plate is inserted fully to the inner part.

Show Quick Links

Chapters

Table of Contents