Making Pre-Checks; Unpacking And Installation; Installation - Canon iPF605 Service Manual

3.1 Installation

3.1.1 Making Pre-Checks

3.1.1.1 Making Pre-Checks

Package dimensions and weight are as follows.
Main body (with a palette): 1140 (W) mm x 914 (D) mm x 645 (H) mm, Approx. 69 kg
+150mm
Installation space
Main body only: 1297 (W) mm x 1770 (D) mm x 644 (H) mm
Main body with stand: 1297 (W) mm x 1993 (D) mm x 1293 (H) mm
When printing from the Front Paper Feed Slot, leave at least 1,300 mm (51.2 in) of unobstructed space in front of the printer and 700 mm (27.6 in) behind it.

3.1.2 Unpacking and Installation

3.1.2.1 Unpacking and Installation

The printer must be moved with it held by three or more persons on both sides. Be careful not to get your lower back and other regions hurt.
When moving the printer, grasp the carrying handles [1] on the left and right side of the bottom.
Holding other portions can drop the printer and you may be injured.
+300mm
+800mm
F-3-1
F-3-2
[1]
F-3-3
+300mm
+150mm
[1]
Chapter 3
0019-6113
0019-6167
3-1