Total Access 5000 Business Services Deployment Guide
EFM Bonding Group Example
The example below creates a bonding group on the DS3 EFM 3‐Port which includes slot 1,
ports 3 and 5, then displays the group status.
NOTE
If there is a problem with the creation of the group, an error message will
follow the create command. Otherwise, it is successful if no error message
follows the command.
6-8
TA5000# application
TA5000(app)# ez-efm 1
TA5000(app-ez-efm 1)# create my_bonding_group link 16/3:1-3:8
upstream 5000 downstream 5000 active-links-minimum 1
Done
TA5000(app-ez-efm 1)# exit
TA5000(app)# exit
TA5000# show interfaces efm-group
EFM Group 1/1/2 {MY_BONDING_GROUP} is ENABLED and UP
Provisioned Links
Active Links
Inhibited Links
UpStream Data Rate
DownStream Data Rate
Loopback
XCV Threshold
XCV Link Removal
TA5000#
: 1/3,1/5
: 1/3,1/5
: None
: 5120
: 5120
: Disabled
: 1e-7
: Enabled
65K510DEP08-1A