Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation and Structure
LAN Port/Active
Write security: 2; Read security: 5
The Ethernet port can be disabled when set to No. In this mode, no
bridge traffic will be forwarded in or out. Setting to Yes (def) allows
the port to participate in the spanning tree topology.
LAN Port/Path Cost
Write security: 2; Read security: 5
This is the cost of using the Ethernet port in the total cost of the path.
The range is from 1 to 65535 with a default of 100 (for 10 Mbits/sec-
ond).
LAN Port/Priority
Write security: 2; Read security: 5
The priority adjusts the relative priority of the Ethernet port among
the multiple bridge ports. The range is 0 to 255 with a default of 128.
Spanning Tree/Bridge Group 1
The Bridge Group 1 is either the first PPP BCP connection or part of
multiple DLCI destinations when running Bridge (RFC 1490) over
Frame Relay.
Bridge Group 1/Active
Write security: 2; Read security: 5
The Bridge Group 1 port can be disabled when set to No. In this mode,
no bridge traffic will be forwarded in or out. Setting to Yes (def) al-
lows the port to participate in the Spanning Tree topology.
Bridge Group 1/Path Cost
Write security: 2; Read security: 5
This is the cost of using the Bridge Group 1 in the total cost of the path.
The range is from 1 to 65535 with a default of 1302 (for 768 kbits/sec-
ond).
3-26
Express L768 User Manual
61203192L1-20
Advertisement
Table of Contents
