1. From the Total Access 5000 Main menu, select System CLI , and press E
2. From the CLI menu, select CLI Command Entry , and press E
3. Select Y to enter the CLI command interface.
4. Log in again using the default ADMIN and PASSWORD options. The CLI prompt is
5. Type enable , and press E
6. From the Enable prompt, type configure terminal , and press E
7. From the Global Configuration prompt, provision the module administration state by
8. From the Global Configuration prompt, type interface t3 <shelf/slot/port> , and
9. Provision the port administration state by performing one of the following commands:
Provision the Uplink Identifier
To provision the uplink identifier, complete the following:
1. From the Enable prompt, type configure terminal , and press E
2. From the Global Configuration prompt, type ethernet default interface efm-
NOTE
Use the WORD input to enter a string without spaces. This input is case
sensitive.
65K510DEP08-1A
Appendix J, GigE Star Provisioning - Central Office Terminal (COT) Provisioning
The following response is displayed:
Use EXIT to exit CLI session.
displayed.
Global Configuration prompt.
performing one of the following commands:
• Type no slot shutdown <shelf/slot> , and press E
• Type slot shutdown maintenance <shelf/slot> , and press E
Out of Service, Maintenance
• Type slot shutdown <shelf/slot> , and press E
Unassigned
press E
NTER
.
• Type no shutdown , and press E
• Type shutdown maintenance , and press E
nance
• Type shutdown , and press E
bal Configuration prompt.
, and press E
group WORD
WORD is the group name assigned when configuring the EFM group using EZ‐EFM.
to enable the privileged commands.
NTER
to take a port In Service
NTER
NTER
NTER
to take a port Out of Service, Unassigned
NTER
.
NTER
.
NTER
.
NTER
to access the
NTER
to take a slot In Service
NTER
to take a slot
NTER
to take a slot Out of Service,
to take a port Out of Service, Mainte‐
NTER
to access the Glo‐
J-5