Upgrade: Package Details Window - Christie CP2230 Service Manual

3.7.3 Upgrade: Package Details Window

Table 3.3 Upgrade: Package Details Window
Control
Grid View
Upgrade Different Components
Only
ICP Only Force Install
Force Upgrade All
Factory Install
CP2230 Service Manual
020-100562-06 Rev. 1 (05-2016)
Figure 3-21 Upgrade: Package Details Window
Displays the available components in the upgrade package. This grid also displays
the currently installed version along with the new version found in the upgrade
package. If the current version and new version do not match, the row will be bold
to indicate what will be upgraded.
This selection instructs the upgrade system to only upgrade components that are
newer or older than the currently installed version. This is the default and recom-
mended upgrade method.
This selection instructs the upgrade system to force an ICP only install regardless of
what current version is installed.
This selection instructs the upgrade system to upgrade all components found in the
upgrade package. Components with the same version will also be upgraded.
This selection instructs the upgrade system to clear all configurations and upgrade
all components on the system. This is equivalent to the projector when it's released
from the factory.
Section 3: Service Setups
Description
3-21