Importing A Backup File; Restoring Settings From A Backup File; Deleting A Backup File; Adding An Upgrade Package - Christie CP2309-RGB User Manual

Importing a backup file

Import a backup file to restore projector settings.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Insert a USB flash drive into the Management USB port on the projector communication
board.
3. Select Import Backup.
4. Browse to the location of the file or enter a name for the backup file in the Name field.
5. Select the file and select Accept.
6. If the file already exists, in the confirmation dialog select Overwrite.

Restoring settings from a backup file

Restore projector settings from a backup file.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Select a backup file and select Restore
3. Select the settings you want to restore and select Restore.
4. Select OK.

Deleting a backup file

Delete a backup file if it is no longer required or is uploaded in error.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Select a backup file and select Delete
3. To confirm, select Delete.

Adding an upgrade package

An upgrade package is used to upgrade the projector software.
A maximum of 10 upgrade packages can be stored. When you add an upgrade package that exceeds
this limit, the system deletes the upgrade package that was last used.
1. In the left navigation menu, select Service Setup > System Upgrade.
A list of upgrade files appears in the left pane.
2. Select + Add New Package.
3. Browse to the location of the upgrade package.
4. Type a name for the upgrade package and select Accept.
CP2309-RGB User Guide
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Backing up, restoring, and upgrading files
.
.
87