Mirage 304K Specifications; Display; Control Signal Compatibility - Christie Mirage 304K Installation And Setup Manual

Mirage 304K
Specifications
Learn about the product specifications. Due to continuing research, specifications are subject to
change without notice.

Display

Learn about the display specifications.
Panel resolution and refresh rate
Pixel format (H x V square pixels)
Processing path
Achievable contrast ratio
450:1 ANSI, up to 1800:1 Full Frame ON/OFF
Color and grayscale resolution
Displayable colors
Grayscale resolution
White point
Nominal white (full white, after calibration)
Gamma
Nominal

Control signal compatibility

Ethernet port
Interface
Connector
Mirage 304K (Bm.1) Installation and Setup Guide
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
4096 x 2160
23.97 - 60 Hz
35.2 trillion
45 bits total linear, 15 bits per RGB component
x = 0.300 +/- 0.050
y = 0.300 +/- 0.050
2.2 ± 5%
10Base-T/100Base-TX
Female RJ-45
49