Boxer 30 Specifications; Display; Control Signal Compatibility - Christie Boxer 30 Installation And Setup Manual
Bb.2
Hide thumbs
Also See for Boxer 30:
- Technical reference (65 pages) ,
- User manual (48 pages) ,
- Installation and setup manual (43 pages)
Table of Contents
Advertisement
Boxer 30 Specifications
Learn about the product specifications. Due to continuing research, specifications are subject to
change without notice.
Display
Learn about the display specifications.
Panel resolution and refresh rate
Pixel format (H x V square pixels)
Processing path
Achievable contrast ratio
450:1 ANSI, up to 1800:1 Full Frame ON/OFF
Color and grayscale resolution
Displayable colors
Grayscale resolution
White point
Nominal white (full white, after calibration)
Gamma
Nominal
Control signal compatibility
Ethernet port
Interface
Connector
3D sync
Connector
Interface
Boxer 30 (Bb.2) Installation and Setup Guide
020-102017-08 Rev. 1 (02-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
2048 x 1080
23.97 - 60 Hz
35.2 trillion
45 bits total linear, 25 bits per RGB component
y = 0.300 +/- 0.050
y = 0.300 +/- 0.050
2.2 ± 5%
10Base-T/100Base-TX
Female RJ-45
BNC Male
TTL inputs and outputs
38
Advertisement
Table of Contents
