Intended Use; Qualification Of Personnel - JUMO mTRON T Operating Manual

Measuring, control, and automation system process engineering application

Hide thumbs Also See for mTRON T:

Table of Contents

1 Introduction

1.2.3

Intended use

The measuring, control, and automation system is intended for use in an industrial environ-

ment, as specified in the technical data of the individual system modules. Other uses beyond

those defined are not viewed as intended uses.

The modules are manufactured in compliance with applicable standards and directives as well

as the applicable safety regulations. Nevertheless, incorrect use may lead to bodily injury or

property damage.

To avoid dangers, the modules may only be used:

•

for the intended use

•

when in good order and condition

•

when taking into account the technical documentation provided

Even if a module is used correctly and according to the intended use, it may still pose applica-

tion-related dangers, for example as the result of missing safety devices or incorrect settings.

To avoid incorrect settings, this manual contains relevant safety information and warnings.

These must be complied with.

1.2.4

This document contains the information required to ensure that the measuring, control, and au-

tomation system described is used as intended.

It is intended for technically qualified personnel who have received special training and have

the appropriate knowledge in the field of automation technology (measuring and control tech-

nology).

Understanding and technically correct observance of the safety information and warnings con-

tained in the supplied technical documentation are prerequisites for safe startup as well as

safety during operation. Only qualified personnel have the required specialist knowledge to cor-

rectly interpret and implement the safety information and warnings contained in this document

in specific situations.

Table of Contents