Setpoint Values (Program Generator Outputs) - JUMO mTRON T Operating Manual

3.9

Setpoint values (program generator outputs)

Setpoint values of the program generator (outputs) are to be used in a plant-specific manner.
Here are just two examples of how a setpoint value is connected to an analog output of the 4
channel analog output module or is used as a controller setpoint value for the multichannel con-
troller module.
Further configuration of the relevant module is not part of this description.
Connect setpoint value with analog output of the 4 channel analog output module
[Module] > Configuration level > NV connecting list:
In this example, setpoint value 1 (Channel 1 SP1) of program generator 1 is issued via output
1 (NV_AO01) of the 4 channel analog output module.
3 Configuration
59