Program Generators - JUMO mTRON T Operating Manual

Measuring, control, and automation system process engineering application

Hide thumbs Also See for mTRON T:

Table of Contents

3 Configuration

Connect signals of the process contacts with digital outputs

[Module] > Configuration level > NV connecting list:

In this example, both the process contacts of program generator 1 are issued via outputs 9 und

10 (NV_DO09, NV_DO10) of the 12 channel digital input/output module.

3.7

Program generators

Activate program generators and implement general settings

CPU -> Configuration level -> Program generator (> General)

The program generator is activated via the function (= program generator). In this example, the

"start with time" parameter was activated (yes), so a program start according to date and time

specification is possible (see Chapter 2.3.6 "Program selection/start", page 30). In addition, the

Table of Contents