Program Selection/Start - JUMO mTRON T Operating Manual

2 Process screen operation
2.3.6

Program selection/start

Call up from the basic status
With this function, a program is selected and started. There is the option to choose the start
section and to specify a delay time or a start time (date and time).
Select program
(1)
(2)
(1) Status bar:
"Program generator in basic status" symbol
Program generator number (in this case: 2)
"P" symbol (program) and program name
(in this case: no program has been
selected yet)
(2) Control elements (from left to right):
Detailed information about the program
generator
Back (without program selection)
30
(3) Select program:
List of all programs that were assigned to
this program generator
Select program from the list
(4) Specify start section:
Input section number (default setting: sec-
tion 1)
With "start at actual value" (program gener-
ator configuration), no start section can be
specified.
(5) Activate lead time, if required:
Start time (start time with date and time)
Delay (lead time in hh:mm:ss)
The input option depends on the program
generator configuration (start with time:
yes/no).
(3)
(4)
(5)