JUMO mTRON T Operating Manual page 15

User groups and user rights
A user is assigned to a user group and therefore possesses the rights that are associated with
that user group.
The user groups available in the process engineering application are identical to those in the
measuring, control, and automation system standard application:
• User group 1: Masters
The user has all rights (administrator).
• User group 2: Users 1
The user cannot manage users but has all other rights.
• User group 3: Users 2
The user cannot manage users and cannot configure or parameterize the system.
• User group 4: Users 3
The user cannot manage users and cannot configure or parameterize the system. The user
also cannot edit programs (not even temporarily), operate the controller or adjust the time.
• User group 5: Services
The user has the rights that are typically required for a service technician. That includes,
among others, rights for user administration, configuration, parameterization, and time ad-
justment.
A user who is not logged on will only be able to view the overview screen and can log on from
there. The user can also open and view the event list.
Making changes to the user groups (names, rights) is not possible with the process engineering
application. User groups are essentially established as part of the project configuration with the
setup program.
 Setup program manual (B 705000.6)
2 Process screen operation
15