Intended Use; Qualification Of Personnel; Acceptance Of Goods, Storage, And Transport; Checking The Delivery - JUMO LOGOSCREEN 700 Brief Instructions

1 Introduction
1.2

Intended use

The device is designed for use in an industrial environment as specified in the technical data. Other uses
beyond those defined are not viewed as intended uses.
The device has been manufactured in compliance with applicable standards and directives as well as
the applicable safety regulations. Nevertheless, improper use may lead to personal injury or material
damage.
To avoid danger, only use the device:
• For the intended use
• When in good order and condition
• When taking the technical documentation provided into account
Risks resulting from the application may arise, e.g. as the result of missing safety provisions or wrong
settings, even when the device is used properly and as intended.
1.3

Qualification of personnel

This document contains the necessary information for the intended use of the device to which it relates.
It is intended for staff with technical qualifications who have been specially trained and have the appro-
priate knowledge in the field of automation technology.
The appropriate level of knowledge and the technically fault-free implementation of the safety informa-
tion and warnings contained in the technical documentation provided are prerequisites for risk-free
mounting, installation, and startup as well as for ensuring safety when operating the described modules.
Only qualified personnel have the required specialist knowledge to correctly interpret and implement the
safety information and warnings contained in this document in specific situations.
1.4

Acceptance of goods, storage, and transport

1.4.1

Checking the delivery

• Ensure that the packaging and its contents are undamaged
• Check the delivery for completeness against the packing slip and order details
• Inform the supplier immediately if there is any damage
• Store damaged parts until clarification is received from the supplier
1.4.2

Important information about storage and transport

• Store the device in a dry, clean environment. Observe the admissible ambient conditions (see "Tech-
nical data")
• Protect the device from shock during transport
• The original packaging provides optimum protection for storage and transport
1.4.3

Returning goods

In the event of repair, return the complete device in clean condition.
Use the original packaging to return goods.
Accompanying letter for repair
Please include the completed accompanying letter for repair when returning goods.
Do not forget to state the following:
• Description of the application and
• Description of the error that has occurred
8