Door Open" And "Pause" Events - JUMO mTRON T Operating Manual

Measuring, control, and automation system process engineering application

Hide thumbs Also See for mTRON T:

Table of Contents

3 Configuration

cess contact for starting the smoke generator is set to "switch-on advanced" and the lead time

(control function time) is specified.

3.5

"Door open" and "pause" events

Deactivate process contacts (yes/no)

CPU > Configuration level > PLC configuration

In this example, all process contacts of program generator 1 are deactivated for the duration of

the "door open" (signal of the door contact) or "pause" (program stopped) event.

Select digital signal (door contact)

In the same dialog, the door contact digital signal is selected:

In this example, an input signal of the 12-channel digital input/output module (Digit.I/O 12x\ ...)

is used. With an open door, the signal must be TRUE.

Table of Contents