Table of Contents
Advertisement
2 General information
2.1
Preface
Read through this document carefully and familiarize yourself with the opera-
tion of the device before you start using it. Keep this document close at hand
and in the immediate vicinity of the device so that you or the specialist person-
nel can consult it at all times in case of doubt.
Mounting, startup, operation, maintenance, and decommissioning must only
be performed by personnel with a specialist qualification. The specialist per-
sonnel must have carefully read through and understood the operating manual
prior to commencing any work.
The liability and warranty of the manufacturer for damage and consequential
damage is rendered void in the event of improper use, failure to observe this
operating manual, deployment of personnel with insufficient qualifications,
and unauthorized modifications to the device.
The manufacturer is not liable for costs or damages incurred by the user or by
third parties through the use of this device, particularly in the event of
improper use of the device or in the event of misuse or malfunctions relating to
the connection or the device.
2.2
Intended use
When used with a securely connected sensor, the device is designed for mea-
suring conductivity, specific electrical resistivity, salt content, and TDS.
The safety information (see chapter 2.3 "Safety information") in this operating
manual must be observed.
The device must only be used under the conditions or for the purposes for
which it has been designed.
The device must be handled with care, protected against pollutants, and used
according to the technical data.
2.3
Safety information
The device has been built and tested according to the safety regulations for
electrical measuring devices. Please observe the customary safety precau-
tions and the device-specific safety information in this operating manual.
DANGER!
If it is assumed that risk-free operation of the device is no longer possible, the
device must be decommissioned and guarded against subsequent startup by
means of an identification marking. The safety of the user may be compro-
mised by the device if, for example, the device
• features visible damage,
• no longer operates in the specified manner,
• has been stored in unsuitable conditions for an extended period of time.
In case of doubt, send the device to the manufacturer for repair/maintenance.
6
All manuals and user guides at all-guides.com
Advertisement
Table of Contents
