JUMO mTRON T Operating Manual page 47

Measuring, control, and automation system process engineering application

Hide thumbs Also See for mTRON T:

Table of Contents

Connect a signal to control a warning device (e.g. horn) with a digital output

[Module] > Configuration level > NV connecting list:

In this example, the alarm signal (PG1_horn) is issued via output 7 (NV_DO07) of the 12 chan-

nel digital input/output module.

NOTE!

If other actions need to be executed via the alarm, additions to the PLC code of this applica-

tion are required. If necessary, the manufacturer should be contacted.

3 Configuration

Table of Contents