JUMO mTRON T Operating Manual page 54

Measuring, control, and automation system process engineering application

Hide thumbs Also See for mTRON T:

Table of Contents

3 Configuration

Set changeover condition (time/setpoint value)

In the same window, the condition for section changeover is also defined:

Section changeover:

•

Time: after expiry of section time

•

Setpoint value: after reaching the setpoint value (core temperature = core setpoint value)

(No section time can be entered in the program plan.)

•

Time and setpoint value: after expiry of section time AND after reaching the setpoint value

•

Time or setpoint value: after expiry of section time OR after reaching the setpoint value

•

Time != 0 or Setp. ! = NoInput: special option with no meaning in the process engineering

application (in this case, has the same function as "time or setpoint value").

Setpoint value 3 (T_core) was previously selected as the setpoint value for the section change-

over (core setpoint value).

Table of Contents