Process Screen Operation; Overview Screen - JUMO mTRON T Operating Manual

NOTE!
Process screen operation is fundamentally only possible in system status "run".
In system status "stop", certain inputs are accepted (for example, user log-on and log-out),
but no process screens are updated.
In system status "stop", the toolbar is automatically displayed and its functions are activated.
2.1

Overview screen

The overview screen is the access point to the process screen operation. Here, up to 9 program
generators (plants) are displayed.
Default status
(1)
(2)
(1) Status bar: user log-on and call up of cen-
tral processing unit event list
The event list can also be called up without
logging on (acknowledgement only possi-
ble with log-on).
NOTE!
If only program generators 1 to 4 are active, these will be displayed larger in the overview so
that all of the available screen surface is used. If only program generator 1 is active, this will
again be displayed larger.

2 Process screen operation

(2) Overview of the pre-configured and active
program generators 1 through to 9, in each
case without a program
Inactive program generators (= without
function) are not displayed.
11