JUMO mTRON T Operating Manual page 60

Measuring, control, and automation system process engineering application

Hide thumbs Also See for mTRON T:

Table of Contents

3 Configuration

Use setpoint value as setpoint value controller of the multichannel controller module

[Module] > Configuration level > NV connecting list (> Analog signal):

In this example, setpoint value 1 (Channel 1 SP1) of program generator 1 is connected with an

input signal (NV_C01Setpoint) of the multichannel controller module.

This signal is designated as a setpoint value for the first controller channel (controller 1) of the

module, but it must also be selected in the controller configuration as an input signal.

[Module] > Configuration level > Controller (> Controller 1 > Controller input):

In this example, the input signal (NV_C01Setpoint) of the multichannel controller module is

connected with the setpoint value input of the first controller channel (Controller 1).

Table of Contents