JUMO mTRON T Operating Manual page 34

2 Process screen operation
Section change
A section change (previous/next section) is carried out directly without additional confirmation
prompt. If the program generator is in the last section, the program will end immediately with
"next section".
Actual values and setpoint values in the process screen
The actual value for the display is selected in the PLC configuration of the central processing
unit from the analog selector (system analog signals).
 Chapter 3.2 "Actual values", page 43
Controlling the program generators
The program generators can be controlled using the process screen and also via digital signals
according to the configuration of the program generator (start, section change, pause, abort).
Symbols to identify process data
Symbol
34
Meaning
Chamber temperature
Humidity
Core temperature
Program run time and remaining program time