JUMO mTRON T Operating Manual page 22

2 Process screen operation
Select a program
(1)
(2)
(1) Status bar:
"Edit program" symbol
(2) Control elements (from left to right):
Delete program
Copy program
Start program editor
Back (basic status)
22
(3) Program selection:
Previously selected program (new program
selection possible)
(4) Edit:
Edit name of selected program
(5) Assign program generator:
Select one or several program generators
with which the program can be run (in this
case: program generator 2 was not
selected, program generator 7 is not con-
figured).
In the case of a limit value violation due to
a setpoint value, the corresponding pro-
gram generator will be displayed as red (in
this case: program generator 9).
(6) Favorite:
Identify a programm as a favorite, then it
will be placed at the start in the program
selection list.
(7) Program repetition/Number:
Define program repetition (inactive, infinite
or number) and state the number of repeti-
tions if necessary.
(3)
(4)
(5)
(6)
(7)