Table of Contents
Advertisement
4 Configuration parameters
Start time
Configuration
➔ Meas. storage
timed operation
End time
Configuration
➔ Meas. storage
timed operation
Stored value
Configuration
➔ Meas. storage
timed operation
Storage rate
Configuration
➔ Meas. storage
timed operation
4.2.7 Configuration - Outputs (option)
Parameter
Action
Configuration
➔ Outputs
outputs
Operating signal
Configuration
➔Outputs
outputs
Action
Configuration
➔Outputs
outputs
60
All manuals and user guides at all-guides.com
➔ Timed operation
➔ Start time
➔ Timed operation
➔ End time
➔ Timed operation
➔ Stored value
➔ Timed operation
➔ Storage rate
➔ Relay K1
➔ Action
➔ Relay K1
➔ Operating signal
➔ Relay K2 — K3
➔ Action
any time
any time
Average val.,
Instant val.,
Minimum,
Maximum,
Peak value
1 — 5 — 32767s
Value/selection
Off,
n.o. (make),
n.c. (break)
Off,
Logic inp1 — 4,
Logic channel 1 — 6,
Low alarm 1 — 6,
Low comb. alarm,
High alarm 1 — 6,
High comb. al.,
Counter/I al. 1 — 6,
C/I comb. al.,
Comb. alarm,
Memory al.,
Error,
Modbus-Flag
Off,
n.o. (make),
n.c. (break)
Off when
start time =
end time
v Chapter 2.7 "Operating
modes"
Chapter 2.8 "Data
storage"
v Chapter 2.7 "Operating
modes"
Chapter 2.8 "Data
storage"
Description
The configured signal is
output to the relay.
If n.o. (break) or n.o. (make)
is selected, the parameter
Outputs is automatically
set to Low alarm 1 or Low
alarm 2.
Advertisement
Table of Contents
