Query The Tcp/Ip Port; Set The Tcp/Ip Port; Query The Status Of Ethernet Ports; Set The Status Of Ethernet Ports - Lightware HDMI-TPS-TX210 User Manual

7.5.8. Query the TCP/IP port

Description: TCP/IP port setting can be queried as follows.
Command {LW2_PORT=?}
Response (LW2_PORT=<port_nr>)CrLf ← (LW2_PORT=10001)CrLf
Explanation1: The port number for LW2 protocol is 10001 (default value).
Command {LW3_PORT=?}
Response (LW3_PORT=<port_nr>)CrLf ← (LW3_PORT=6107)CrLf
Explanation2: The port number for LW3 protocol is 6107 (default value).

7.5.9. Set the TCP/IP port

Description: TCP/IP port setting can be set as follows.
Command {LW2_PORT=<port_nr>}
Response (LW2_PORT=<port_nr>)CrLf ← (LW2_PORT=10001)CrLf
Explanation1: The port number for LW2 protocol is set to 10001 (default value).
Command {LW3_PORT=<port_nr>}
Response (LW3_PORT=<port_nr>)CrLf ← (LW3_PORT=6107)CrLf
Explanation2: The port number for LW3 protocol is set to 6107 (default value).

7.5.10. Query the status of Ethernet ports

Description: The link, the local Ethernet ports, and the TCP/IP connections to the CPU
can be queried with this command.
Command {ETH_ENABLE=?}
Response (ETH_ENABLE=<cpu>;
Legend:
Explanation: The gateway address is set to 192.168.0.50.

7.5.11. Set the status of Ethernet ports

Description: Enable or disable the link, the local Ethernet ports, and the TCP/IP
connections to the CPU.
Command
Response (ETH_ENABLE=<cpu>;
Legend:
Explanation: The link Ethernet port is set to disabled, the other ports are not modified.
Section 7. LW2 Programmer's reference
Format
Format
Format
Format
Format
<local>;<link>)CrLf
<cpu>: 0 = TCP/IP disabled, 1 = TCP/IP enabled
<local>: 0 = local Ethernet is disabled, 1 = local Ethernet is enabled
<link>: 0 = link Ethernet is disabled, 1 = link Ethernet is enabled
Format
{ETH_ENABLE=<cpu>;
<local>;<link>}
<local>;<link>)CrLf
see section 7.5.10 on page 73.
"X" parameter can be used to prevent modifying a parameter.
HDMI-TPS-TX200 series
Example1
→ {lw2_port=?}
Example2
→ {lw3_port=?}
Example1
→ {lw2_port=10001}
Example2
→ {lw3_port=6107}
Example
→ {eth_enable=?}
← (ETH_ENABLE=1;1;1)CrLf
Example
→ {eth_enable=X;X;0}
← (ETH_ENABLE=1;1;0)CrLf
User's Manual
Page 73 / 122