Crosspoint Menu - Lightware HDMI-TPS-TX210 User Manual

6.5. Crosspoint menu

When LDC finds the hardware, it determines the product type, and the LDC starts with the
default page, showing the Crosspoint menu.
3
4
Main menu
1
Information ribbon
2
3 Video input ports
4 Audio input ports
Audio output
5
6 Video output
Advanced view
7
Navigation buttons
8
Properties
9
Page 40 / 122
2
The available menu items are displayed. The active one is
showed with dark grey background color.
The label shows the type of the connected device. Device
discovery window can be displayed by clicking on this ribbon.
Each tile represents a video input port. The tile below the port
shows current crosspoint setting; if the port is switched to the
output, the color of the tile is white, otherwise grey.
Each tile represents an audio input port. The tile below the
port shows current crosspoint setting; if the port is switched to
the output, the color of the tile is white, otherwise grey. Dark
grey means the audio port is not allowed to embed in the
current video input port.
The audio output of the TPS and local outputs; the audio
signal is the same on those ports.
The video output of the TPS and local outputs; the video
signal is the same on those ports.
Displaying Advanced view page, showing the Terminal
window and the protocol tree.
If the window is smaller than required, the ports may not fit in
the available area. Thus the arrows on this button get
activated and the ports can be scrolled. Clicking on the middle
icon restores the original layout (window is arranged to the left
top corner).
Toggling right panel display, showing the properties of
selected port. The panel is also displayed when clicking on a
port tile.
Section 6. Software control – using Lightware Device Controller (LDC)
1 8
5 6
9
7