7.2.3. View firmware version of the CPU
Description: View the CPU firmware revision.
Command {f}
Response (FW:<FW_VER><s>)CrLf
Legend: <FW_VER> is the firmware version. It is followed by <s> string which may indicate
special versions. <s>=r indicates standard version.
7.2.4. Connection test
Description: Simple test to see if the connection is established successfully.
Command {PING}
Response (PONG!)CrLf
7.2.5. View serial number
Description: The transmitter responds its 8-digit serial number.
Command {s}
Response (SN:<SERIAL_N>)CrLf
7.2.6. Compile time
Description: Returns the date, when the microcontroller firmware was compiled.
Command {CT}
Response (Complied: <DATE&TIME>)
7.2.7. View installed board(s)
Description: Shows the hardware name and revision of the installed cards.
Command {is}
Response (SL#●0●<MB_DESC>)CrLf
Explanation: The device reports its motherboard (slot 0).
7.2.8. View firmware for all controllers'
Description: Shows the firmware versions of all installed controllers.
Command {FC}
Response (CF●<DESC>)CrLf
Explanation: The device has one control panel.
Page 62 / 122
Format
Format
Format
Format
CrLf
Format
(SL●END)CrLf
Format
(CF●<DESC>)CrLf
...
(CF END)CrLf
Example
→ {f}
← (FW:1.0.3b1 r1256)CrLf
Example
→ {ping}
← (PONG!)CrLf
Example
→ {s}
← (SN:12345678)CrLf
Example
→ {ct}
← (Compiled: Mar 4 2015 19:41:43)
CrLf
Example
→ {is}
←
(SL# 0 SW4-TPS-TX240 V10_2b)
CrLf
←
(SL END)CrLf
Example
→ {fc}
←
(CF SW4-TPS-TX240 1.0.3b1
r1256)CrLf
←
(CF END) CrLf
Section 7. LW2 Programmer's reference