Query The Video Input Port Priority; Change Video Input Priority; Query Audio Input Port Priority - Lightware HDMI-TPS-TX210 User Manual

7.3.12. Query the video input port priority

Description: The priority order of the input ports can be queried as follows.
Command {PRIO_V<out>}
Response (PRIO_V<out>=<in1_prio>;
Legend:
Explanation: I2 has the highest priority (0), I1 has the second highest priority number (1).
I5 has priority 31 which is the lowest possible setting; it means I5 is disabled from the
priority list and will not be selected.
Info: In this case the outputs are linked; the change will affect both local and TPS output port.

7.3.13. Change video input priority

Description: The priority order of video input ports can be changed as follows.
Command {PRIO_V<out>=<in1_prio>;
Response (PRIO_V<out>=<in1_prio>;
Legend:
Explanation: I2 has the highest priority (0), I1 has the second highest (1). I5 has the lowest
priority (4).
Info: Always set all the ports' priority when changing, otherwise the change will not be executed
and the response will be the current setting (like querying the priority setting).
Info: In this case the outputs are linked; the change will affect both local and TPS output port.

7.3.14. Query audio input port priority

Description: The settings of audio input priority can be queried as follows.
Command {PRIO_A<out>}
Response (PRIO_A<out>=<in1_prio>;
Legend:
Explanation: I2 has the highest priority (0), I1 has the second highest priority number (1).
I5 has priority 31 which is the lowest possible setting; it means I5 is disabled from the
priority list and will not be selected.
Info: In this case the outputs are linked; the change will affect both local and TPS output port.
Section 7. LW2 Programmer's reference
Format
<in2_prio>;..;<in _prio>)CrLf
n
<out>:
_prio>: Input ports' priority number. See more details
<in1_prio>...<in
n
Format
<in2_prio>;...;<in _prio>}
n
<in2_prio>;...;<in _prio>)CrLf
n
<out>:
_prio>: Input ports' priority number. See more details about
<in1_prio>...<in
n
Format
<in2_prio>;..;<in _prio>)CrLf
n
<out>:
<in1_prio>...<in _prio>: Input ports' priority numbers. See more details
n
Example
→ {prio_v1}
← (PRIO_V1=1;0;2;3;31)CrLf
The output port number.
about port numbering in section
Example1
→ {prio_v1=1;0;2;3;4}
← (PRIO_V1=1;0;2;3;4)CrLf
The output port number.
port numbering in section
Example
→ {prio_a1}
← (PRIO_A1=1;0;2;3;31)CrLf
The output port number.
about port numbering in section
HDMI-TPS-TX200 series
User's Manual
11.4 on page 118.
11.4 on page 118.
11.4 on page 118.
Page 67 / 122