Save, Load Or Clear An Event - Lightware HDMI-TPS-TX210 User Manual

Hide thumbs Also See for HDMI-TPS-TX210:
Table of Contents

Advertisement

The tree structure is opened and the available properties are listed in the drop-down box.
The manual of the selected property can be seen below it.
Step 3. Set the desired value in the field next to the list.
Step 4. Click on the OK button to save the settings.
If the condition is finished, set the action with the same method. In case of advanced mode,
the type of the condition and the action is custom (in red square).
The system checks the validity of the event. If everything is correct, a green line can be
seen at the bottom of the event area. Name the event and press the Set name button.

6.9.4. Save, load or clear an event

Save
Although the device stores the set events, – even after reboot or firmware
upgrade – in some cases event saving to the computer can be useful (e.g.
transfer to another TPS device). Events can be stored in a readable CSV
file (Comma Separated Values) which is a human readable file type and can be
imported/edited by many spreadsheet application.
Info: Events cannot be exported one by one. All events will be stored with the exportation.
To save all events click on "Export to CSV", browse the desired folder, then click "Save".
Load
Click on the "Import from CSV" button. A browse window comes up. Find
the .CSV file than click on the "Open" button.
Clear
Click on the "Clear" button, a confirmation window comes up. Click on the
OK button to clear the event. Clearing the events means setting them to
the factory default values. The names become Event1..20, the condition
and the action get empty value.
Clear all events
All events can be cleared at the same time with the loading
factory default values. All the values will be cleared: names,
conditions, actions. Click on the "Load factory defaults" button. A warning message
appears. Confirm it by clicking on the OK button.
Section 6. Software control – using Lightware Device Controller (LDC)
HDMI-TPS-TX200 series
User's Manual
Export
Import
Clear
Load factory defaults
Page 57 / 122

Advertisement

Table of Contents
loading

Table of Contents