Autoselect - First Detect Mode - Lightware HDMI-TPS-TX210 User Manual

HDMI-TPS-TX200 series
User's Manual
5.1.3. Autoselect – First detect mode
Meaning: Selected input port is switched to the output while it has active signal.
Figure 5-2. Autoselect – First detect mode
Info: The signal detection is handled on a different way in the case of analog audio input: if a 3.5
mm jack plug is connected to Audio in, the port is handled as it has an active signal.
Section 5. Front panel operations Page 29 / 122