Wizard Mode - Lightware HDMI-TPS-TX210 User Manual

HDMI-TPS-TX200 series
User's Manual

6.9.2. Wizard mode

A simple wizard makes things easy for the user, because it lists the most common
conditions and actions. Conditions and actions also have their own buttons.
Step 1. Click on the Wizard button on the Condition side.
Step 2. Select the desired category from the drop-down menu.
Step 3. Select an Expression.
The expression determines the further possible parameters. E.g. if the Expression is a
video signal detection of an input, the port has to be defined in the following step.
Select the desired parameter and click on the OK to finish the wizard of the condition.
The action is the "reply" if the condition becomes true.
Info: The sequence does not matter: you may define the action first.
Section 6. Software control – using Lightware Device Controller (LDC)
Page 53 / 122