Autoselect - Priority Detect Mode - Lightware HDMI-TPS-TX210 User Manual

5.1.6. Autoselect – Priority detect mode
Meaning: The highest priority active input will be selected to transmit.
Info: An input port is active if there is a valid signal on it.
Info: The signal detection is handled on a different way in the case of analog audio input: if a 3.5
mm jack plug is connected to Audio in, the port is handled as it has an active signal.
Section 5. Front panel operations
Figure 5-4. Autoselect – Priority detect mode
HDMI-TPS-TX200 series
User's Manual
Page 31 / 122