Installation; Mounting; Remote Powering (Poe); Connecting Devices - Lightware HDMI-TPS-TX210 User Manual

4. Installation

4.1. Mounting

To mount the transmitter Lightware supplies optional accessories for different usage. There
are two kinds of mounting kits with similar fixing method. The transmitters have two
mounting holes with inner thread on the bottom side; see the bottom view in section
on page 117. Fasten the device by the screws enclosed to the accessory.
The Under-desk double mounting kit makes easy to mount a single device on any flat
surface, e.g. furniture. 1U high rack shelf provides mounting holes for fastening two half-
rack or four quarter-rack sized units. Pocket-sized devices can also be fastened on the
shelf. To order mounting accessories please contact sales@lightware.eu.
Info: The transmitters are half-rack sized.

4.2. Remote powering (PoE)

Remote powering of the transmitters was designed from a new approach as the devices
support PoE (Power over Ethernet) feature. The transmitter can be powered remotely
through TPS connector by using an external power injector module anywhere on the
transmission lane. The transmitter is compatible with IEEE 802.3af standard and able to
work as a Powered Device (PD) but cannot be used as a Power Sourcing Equipment
(PSE).
Important! The transmitters can receive the remote power only via their TPS output port. Using
Lightware's remote power injector (TPS-PI-1P1) is highly recommended.
Info: If both remote and local power sources are connected, the remote power will be used.

4.3. Connecting devices

Info: When a standard Ethernet device is connected to the TPS connector for some reason, the
transmitter is switched to Ethernet fallback mode automatically. TPS port is changed to
work as an Ethernet port, but operating the transmitter this way is not recommended.
4.3.1. Connecting steps – using local PSU
Page 26 / 122
Figure 4-1. Under-desk double mounting kit and 1U high Rack shelf
Figure 4-2. SW4-TPS-TX240 – Powered by a local adaptor
11.2
Section 4. Installation