Auto Tray Switch Feature; Order For Selecting Paper Trays - Konica Minolta bizhub C451 User Manual

Hide thumbs Also See for bizhub C451:

Table of Contents

Copy paper/original documents

Auto tray switch feature

If the selected paper tray runs out of paper while a job is being printed and a

different paper tray is loaded with paper meeting the following conditions,

the other paper tray is automatically selected so printing can continue. If the

optional LCT is installed, a maximum of 6,650 copies (with A4 v paper) can

be made continuously. (The paper tray is automatically switched only if the

"Auto Tray Switch ON/OFF" parameter in the Utility mode is set to "Allow".)

Operating conditions

- The paper is the same size.

- The paper is positioned in the same orientation.

- The paper is the same type.

- The paper trays are selected when the paper tray is automatically

For details on the specifying the paper trays that are selected when the

paper tray is automatically switched, refer to "System Settings" on

As a factory default, when a different paper tray is automatically selected, the

next paper tray in the following list is chosen.

Tray 1 → Tray 2 → Tray 3 → Tray 4 → LCT* → Bypass tray

* Appears only when the optional LCT is installed.

To change the order in which the paper trays are selected, refer to "Sys-

tem Settings" on page 11-20.